What is a trigger diode? The basic structure, characteristics, working principle, application, detection, and measurement methods, installation steps, and development history of trigger diodes 4

3. Semiconductor parameter tester method: Using a dedicated semiconductor parameter tester, the trigger diode is forward biased and the turning voltage of the diode is measured through the tester.diode

7、 Installation steps:

The installation steps for triggering diodes are generally as follows:

1. Preparation work: Clean the workbench, ensure it is dust-free, and prepare the necessary tools and materials.

2. Determine installation location: According to the circuit design requirements, determine the installation location of the trigger diode and mark it on the circuit board.diode

3. Prepare trigger diode: Remove the trigger diode from the packaging, check for damage, and confirm the pin markings and specifications.

4. Welding: Use solder to solder the pins of the trigger diode to the corresponding positions on the circuit board. Pay attention to maintaining good contact between the pins and the circuit board, and ensure that the soldering points are firm and reliable.diode

5. Check: After welding is completed, use a multimeter or other testing equipment to check for short circuits or open circuits between the pins of the trigger diode.

6. Insulation treatment: Insulate the trigger diode as needed to prevent interference or damage to the surrounding circuit.diode