Conformal Coating Guide for Conformal Coated Tantalum Capacitors 7

7. Recommended installation pad geometry: The nib must have sufficient clearance to avoid electrical faults and contact with other components. The size indicated by the width is the same as the maximum value. The width of the capacitor. This is to minimize lateral movement as much as possible.diode

8. Post weld cleaning (removal of flux): Tantalum capacitors are compatible with all commonly used solvents such as TES, TMS, Prelete, chloroethane, terpenes, and water cleaning media. However, CFC/ODS products are not recommended for the production of these devices. Solvents containing methylene should avoid using chlorides or other epoxy solvents as they can damage the encapsulation material of the epoxy resin.diode

At+25 ° C, the leakage current shall not exceed the values listed in the standard rated value table.diode

At+85 ° C, the leakage current shall not exceed 10 times the values listed in the standard rated value table.

At+125 ° C, the leakage current shall not exceed 12 times the values listed in the standard rating table.diode