Conformal Coating Guide for Conformal Coated Tantalum Capacitors 4

Precautions

Solid electrolyte design is the cheapest in many applications under given conditions, and small size is important for a given capacitor unit. They can typically withstand approximately 10% of the rated reverse DC operating voltage. It is also important whether their low-temperature performance is good or not. They do not contain corrosive electrolytes. Vishay Sprague obtained the original solid electrolyte patent and was first listed in 1956. Weishi Semiconductor Sprague maintains its leading position in this field with the widest range of tantalum capacitors. The data covers various types and styles of Vishay bed sheets for consumer and entertainment use. The detailed performance characteristics of Sprague capacitors for electronic, industrial, and military applications must be clearly defined. The metric dimensions shall prevail. The dimensions in inches are circular and for reference only.diode

（1）A0，B0，K0， Determine from the maximum size to the end of the terminal extending from the component body and/or body. The size of the component. The gap and cavity (A0, B0, K0) between the end and side of the terminal or component body must be within a minimum of 0.002 inches (0.05 millimeters) and a maximum of 0.020 inches (0.50 millimeters). The allowed gap must also prevent the components from rotating within the cavity by no more than 20 degrees.diode

(2) The tape with components should be wrapped around the radius "R" without damage. The minimum trailer length may require additional length to provide the "R" minimum value, for a 12 mm embossed strip on a reel with a hub diameter close to the N minimum value.diode