Installation, use, and wiring methods of tension and pressure sensors 3

2. Connect power supply: Connect the positive and negative power lines of the sensor to the positive and negative poles of the power supply respectively. Please note that the voltage of the power supply must comply with the range specified by the sensor.

3. Connect output: Connect the output line of the sensor to a measuring instrument or data acquisition system. Ensure proper connection so that signals can be transmitted correctly.diode

4. Grounding: In order to reduce interference and improve measurement accuracy, the ground wire of the sensor should be connected to the common ground of the system.diode

Precautions

During installation and use, avoid applying force to the sensor beyond its rated range to prevent damage to the sensor.

Regularly inspect and maintain sensors to ensure their good working condition.diode

During the wiring process, pay attention to the correctness of the circuit and the firmness of the contact to avoid measurement errors caused by wiring errors or poor contact.diode

In short, the tension and pressure sensor is a high-precision measuring tool, and the correct installation, use, and wiring methods are crucial to ensure the accuracy and reliability of the measurement results. By following the correct procedures and precautions, measurement efficiency and quality can be effectively improved.diode