Installation, use, and wiring methods of tension and pressure sensors 2

1. Choose installation location: Select the appropriate installation location according to the measurement requirements to ensure that the sensor can correctly sense the required measured force.diode

2. Fixed sensor: Use screws or fixtures to fix the sensor in a predetermined position. Ensure stable installation and avoid affecting measurement accuracy due to vibration or movement.diode

3. Calibration: Before starting the measurement, calibrate the sensor to ensure the accuracy of the measurement results. The calibration process typically involves applying a known weight or force to the sensor and adjusting the output until it matches the known force.diode

4. Protection: When used in harsh environments, appropriate protection should be considered for the sensor to avoid damage from dust, moisture, and other factors.diode

Wiring method

The wiring of tension sensors usually includes power lines, signal lines, and ground lines. The specific wiring steps are as follows:

1. Determine the circuit: Identify the circuit markings on the sensor, usually including positive power supply, negative power supply, output positive, output negative, etc.diode