Disassembly Report: Beishida 45W USB-C Gallium Nitride Fast Charging Charger K46 (TTR810F TTF/YFW Youfeng Micro)

This article is from Charging Head. If there is any infringement, please contact the author for prompt removal

Preface

Beishida has launched a 65W fast charging charger, designed based on cutting-edge gallium nitride solutions, which is compact and portable overall. In addition, it is equipped with the mainstream USB-C interface, providing a maximum of 65W PD fast charging, and also supports UFCS fusion fast charging, further enhancing the overall compatibility of the product and meeting the fast charging needs of major brands of electronic devices such as smartphones and laptops. Below, the charging head network will be disassembled to see how well it is made.

Appearance of Beishida 65W Gallium Nitride Charger


The Beishida 65W gallium nitride charger adopts a highly flame-retardant plastic shell, with a classic white color scheme and a matte finish on the surface of the body, with a simple style.


The word 65W is printed on one side of the waist, indicating the maximum output power of the charger.


The input shell is printed with the parameter information of the charger.

Product parameter close-up

Model: K50

Input: 220V~50/60Hz 0.8A Max

USB-C：5V3A、9V3A、12V3A、15V3A、20V3.25A 65W Max

The charger is equipped with fixed national standard pins.



The top of the body is equipped with a USB-C interface.


The measured length of the charger body is 49.26mm.


The width is 33.85mm.

The thickness is 37.19mm.

Compared with the Apple 61W charger, the size advantage is very obvious.


The size of the charger in the hand is intuitively felt.


Additionally, the weight of the charger was measured to be approximately 82g.


Using ChargerLAB POWER-Z KM003C, it was measured that the USB-C port supports UFCS, FCP, SCP, AFC, QC3+/5, PD3.0, PPS, DCP, and Apple 2.4A charging protocols.



The PDO message shows that the USB-C port also has five fixed voltage levels of 5V3A, 9V3A, 12V3A, 15V3A, and 20V3.25A, as well as two PPS voltage levels of 3.3-11V3A and 3.3-21V3A.


In addition, it was measured that UFCS fusion fast charging has a voltage range of 5-11V3A.

Dismantling of Beishida 65W Gallium Nitride Charger

Disassemble the input terminal housing and connect the pins to the module through wire soldering for power.



Remove the PCBA module, cover the top of the module with thermal pads, and reinforce the capacitors with adhesive.

The measured module length is 45.41mm.


The width is 32.94mm.


The thickness is 26.06mm.


Both the input and output terminals of the module are equipped with small boards, and components such as transformers and capacitors are reinforced with glue.


The back of the motherboard is also covered with thermal pads.


Clean the thermal pad and white glue, and there are also I-shaped inductors, main control chip power supply capacitors, and blue Y capacitors on the front of the module.


Remove the input terminal small board, which is equipped with a delay fuse, NTC thermistor, common mode inductor, and safety X2 capacitor on the front.


The back of the motherboard is equipped with a rectifier bridge, power control chip, optocoupler, surface mount Y capacitor, synchronous rectification controller, and synchronous rectification tube.

The specification of the delay fuse is 3.15A 250V.


NTC thermistor is used to suppress surge current during power on.


Common mode inductor double wire winding is used to filter out EMI interference.


The capacitance of the safety X2 capacitor is 0.22 μF.



Close up of TTR810F rectifier bridge. YFW Youfeng Micro Brand
Yufeng Microelectronics "is a high-tech enterprise specializing in the research and development, production, and sales of semiconductor discrete devices. The company mainly produces and sells: ordinary rectifier diodes, fast recovery diodes, high-efficiency diodes, ultrafast recovery diodes, Schottky diodes, low voltage drop Schottky diodes, silicon carbide diodes, rectifier bridge stacks, fast recovery rectifier bridge stacks, Schottky bridge stacks, TVS transient suppression diodes, ESD electrostatic protection components, voltage regulators, transistors, thyristors, MOSFETs, and so on. For more details, please visit our official website www.yfwdiode.com.